Image

image

 

image

image




Accessories…


Listed below are some of the many accessories available as individual products or as an integrated component of a custom SYTEC enclosure.

 

 

gallery1-1

close-up Click to enlarge…

Enclosure Door Latch Styles:
All Door latches are rated to a minimum of Type 4 rating and feature common mounting details allowing for direct replacement from one style to another. Standard latches are made from cast metal and finished in black powder coat. Type 304 SST and Type 316 SST are also available for Type 4X applications.

In addition to the Door Latches shown above, Telco style over center latches, flush mount swing handles and various other external mounted latches are available for application specific requirements.


 


gallery1-2

 close-up Click to enlarge…

 

Custom Ground Bars:
Ground bars can be produced from copper bar or from 3/16in (.187) thick copper sheet allowing for highly customizable and unique profiles. Sizes, shapes and mounting hole quantity and layout can be tailored to end use applications. Tin plating of the ground bar can be included as an option.

All enclosure Ground Bars can be factory installed and can include Ground Wires joining internal Equipment Mounting Panels, Doors and Ground Bars.


 


gallery1-3

close-up Click to enlarge…

Door Switch Brackets:
Available switch brackets allow use of industry standard Cherry Brand switches. Direct mounting to SYTEC enclosure lip profile provides an economical and configurable mounting detail.



gallery1-4 

close-up Click to enlarge…

Enclosure Gland Plates:
Gland Plates offer a convenient way to customize a standard enclosure product for multiple end use applications. Gland Plates can be constructed to Type 12, 12K, 4 and 4X ratings.



gallery1-5

close-up Click to enlarge…

Swing Frame Support Roller:
Designed for direct mounting to various SYTEC enclosure Swing Frames. Support Rollers provide a guide for heavy equipment as the Frame is opened and closed.

Similarly, accessory Door Support Roller Kits are available for installation to enclosure Doors mounted on un-even surfaces or for applications with heavy equipment mounted to the Door.



gallery1-6

close-up Click to enlarge…

Enclosure Drip Shield Kit:
Designed for installation in the field or factory installed. The Drip Shield Kit provides an overhang on the enclosure Cap and includes Type 4 / 4X rated sealing hardware.

o   Designed as a separate piece part, the bolt-on Drip Shield reduces water crevices commonly seen with Drip Shields that are welded onto the enclosure and thus improves long term corrosion protection.

o   Included sealing hardware maintains enclosure Type ratings.


gallery1-7


close-up Click to enlarge…

Enclosure Sun Shield:
Designed with various mounting options to suit a variety of enclosures. Intended to offer an air gap to the surface of the enclosure to reduce the effects of sun heat loads on internal electronic equipment.


gallery1-8

close-up Click to enlarge…

Angle Iron and Bar Stock Frames:
Available to suit a variety applications and covering a diverse range of sizes.


gallery1-9

close-up Click to enlarge…

Vibration Isolating Enclosure Mounts:
Stainless Steel Wire Rope Isolators can be directly mounted to Enclosures or offered as an Adaptor Kit as shown. Wire Rope Isolators are a superior choice to comparable rubber isolators, offering high chemical resistance, are not affected by aging or temperature variations and have an exceptional long life. Wire Rope Isolators are custom sized based on the enclosure mounting orientation, weight and the required isolation frequency. Please “contact us” to determine suitability and to discuss specific applications in greater detail.



image

  Back to Top…



image

image

 

image