Image

image

 

image

image




CSA / UL Certified Enclosures…


Listed below are some of the custom enclosures manufactured by SYTEC. All of these products can be custom tailored to suit a multitude of end user applications and are available through a wide range of CSA/UL type certifications.

 

 

Click image for closeup view Click to enlarge…

Wall Mount Style:
Enclosures intended for installation with Mounting Tabs located on the rear surface. Various materials, finishes and custom internal equipment mounting provisions are available.

o    14Ga steel, white powder coated equipment panels are included as a standard.

o    Welded, lift-off hinges are standard. Also available with continuous SST piano hinge or SST hidden hinge options. Piano hinge options can also allow the option to reverse the Door Swing in the field.

o    Numerous latch and enclosure options are available as per the “Accessory” page.

o    Available as Type 4, 4X, 3R and Type 12 or 12K.


 


 

Click image for closeup view Click to enlarge…

Through Wall Style with Beauty Trim Ring:
Enclosures are intended for recessed mounting. The welded Mounting Angle Frame around the exterior perimeter allows the enclosure to be partially recessed into a building wall or frame structure. Various materials, finishes and custom internal equipment mounting provisions are available.

o    A Beauty Trim Ring is included to allow installation on the interior side of the building opening.

o    14Ga steel, white powder coated equipment panels are included as a standard.

o    Welded, lift-off hinges are standard. Also available with continuous SST piano hinge or SST hidden hinge options. Piano hinge options can also allow the option to reverse the Door Swing in the field.

o    Numerous latch and enclosure options are available as per the “Accessory” page.

o    Available as Type 4, 4X, 3R and Type 12 or 12K.


 


Click image for closeup view Click to enlarge…

Through Wall / L-Shape with partial Beauty Trim Ring:
Similar in application to the standard Through Wall style, the L-Shape Through Wall Enclosure version provides the ability to house larger batteries in the bottom portion of the enclosure and limits the amount of space that the enclosure protrudes into the building. The design allows use of temperature sensitive equipment while limiting interior building space requirements.

o    A Beauty Trim Ring is included to allow installation on the interior side of the building opening.

o    14Ga steel, white powder coated equipment panels are included as a standard.

o    Welded, lift-off hinges are standard. Also available with continuous SST piano hinge or SST hidden hinge options. Piano hinge options can also allow the option to reverse the Door Swing in the field.

o    Numerous latch and enclosure options are available as per the “Accessory” page.

o    Available as Type 4, 4X, 3R and Type 12 or 12K.



 

Click image for closeup view Click to enlarge…

Pole Mount Style
Enclosures include a bolt-on or weld on U-shaped Pole Mounting Bracket. Larger enclosures can include secondary brace bars allowing additional support and resistance to movement from wind loading.

o    14Ga steel, white powder coated equipment panels are included as a standard.

o    Welded, lift-off hinges are standard. Also available with continuous SST piano hinge or SST hidden hinge options. Piano hinge options can also allow the option to reverse the Door Swing in the field.

o    Numerous latch and enclosure options are available as per the “Accessory” page.

o    Available as Type 4, 4X, 3R and Type 12 or 12K.



Click image for closeup view Click to enlarge…

Floor Mount Direct – Multi-Door:
Designed for direct mounting onto a floor. Enclosure Doors are offset upward to increase Door swing clearances.

o    12Ga steel, white powder coated equipment panels are included as a standard.

o    Center Door Posts are welded for Type 4 and 4X. Removable Door Posts are available for Type 3R, 12 and 12K.

o    Welded, lift-off hinges are standard.

o    Numerous latch and enclosure options are available as per the “Accessory” page.



Click image for closeup view Click to enlarge…

Floor Mount with Legs:
Similar to the Floor Mount Direct enclosure above, this enclosure design adds formed Legs on the bottom. Raising the enclosure through use of the Base Legs can improve the operator interface and provide for ease of cable entry glands located on the bottom surface of the enclosure.

o    12Ga steel, white powder coated equipment panels are included as a standard.

o    Center Door Posts are removable and available for Type 3R, 12 and 12K.

o    SST continuous length Piano hinges are standard.

o    Numerous latch and enclosure options are available as per the “Accessory” page.

 


 

gallery1-7


Click image for closeup view Click to enlarge…

Heavy Duty Shelter with built in Skid:
Designed with an inner tube structure and full seam welded plates on the exterior surfaces.

o    Includes mounting provisions for internal enclosures.

o    Skid includes lift points and forklift pockets.

o    Venting provisions and cable entry access doors are available as options.

o    Shelters are intended to offer physical protection for internal enclosures and are not CSA rated.


gallery1-8

Click image for closeup view Click to enlarge…

TELCO / CATV B2 Pedestal:
Industry standard design available with non-vented and vented Front Cover styles. Front Covers include a built in Cap providing excellent access to internal equipment.

o   Integrated stake provides economical installation cost.

o    Includes incoming drop-cable plug.

o    Installation ground line marking included on Lower Front Cover.


gallery1-9

Click image for closeup view Click to enlarge…

TELCO / CATV SG-Style:
Industry standard design available with SST or Zinc Plate external latches. L-Shaped Doors provide excellent access to internal equipment. The open base design allows direct incoming cable entry.

o   Various Telco style Ground bars available.

o    Includes plywood backboard.

o    Custom colors available for architectural controlled neighborhoods.

 


gallery1-10 

Click image for closeup view Click to enlarge…

Industrial / Power Application Tank:
Custom tank available with SST or Zinc Plate external latches. All tank welds are 100% chemically tested to ensure weld penetration and leak free seams. Sizes and materials to suit extensive end use applications.


gallery1-11

Click image for closeup view Click to enlarge…

 

Type 3R Control Enclosure:
Economical Type 3R Control Enclosures suit a variety of end use applications. Shown with optional internal swing panels and available in an wide range of sizes and materials.

o    14Ga steel, white powder coated equipment panels are included as a standard.

o    Available with Internal Swing Panel.

o    Continuous SST piano hinge are standard, eliminating rust seen on painted or ZP hinges.

o    Numerous latch and enclosure options are available as per the “Accessory” page.

o    Available as Type 3R and Type 12 or 12K.


image

 Back to Top…



image

image

 

image